VW MINI OIL SUMP KIT
Help prevent oil starvation in your VW by installing this "mini" sump to increase oil capacityin your VW Bus, Bug, or Ghia. Kit comes with 3 different size pick-up tubes, studs, nuts, and gaskets.
Your existing drain plug can be re-used, or use our magnetic drain plug. $64.95
|
VW OIL SUCTION KIT
This kit provides consistent oil pick up in your VW Bug, Ghia, or Bus. The supplied sump plate depression keeps the pick-up extension submerged in oil at all times.
The built in screen helps keep harmful particles from reaching vital engine components. This is a great addidtion to any performance-built engine to insure a longer engine life.
$69.95
|
COPPER CYLINDER HEAD GASKETS
Set of four copper head gaskets for 90.5-92mm cylinders
Installs between the top of the cylinder and the cylinder head. .040" $34.95
|
COPPER CYLINDER HEAD GASKETS
Set of four copper head gaskets for 90.5-92mm cylinders
Installs between the top of the cylinder and the cylinder head. .050" $34.95
|
COPPER CYLINDER HEAD GASKETS
Set of four copper head gaskets for 92mm cylinders
Installs between the top of the cylinder and the cylinder head. .060" $29.99
|
COPPER CYLINDER HEAD GASKETS
Set of four copper head gaskets for 94mm cylinders
Installs between the top of the cylinder and the cylinder head. .040" $34.95
|
COPPER CYLINDER HEAD GASKETS
Set of four copper head gaskets for 94mm cylinders
Installs between the top of the cylinder and the cylinder head. .050" $34.95
|
COPPER CYLINDER HEAD GASKETS
Set of four copper head gaskets for 94mm cylinders
Installs between the top of the cylinder and the cylinder head. .060" $29.99
|
VW BUG ENGINE NARROW OIL SUMP W/ FILTER
Cast aluminum oil sump is only 1 3/4" deep. Adds oil capacity and offers improved filtration and easy bolt on installation. Filter design allows for unimpeded oil flow even if the filter gets plugged. Stainless steel micron filter can be cleaned and reused. $179.90
|
VW BUG ENGINE CASE OIL DUAL BYPASS ADAPTER
This adapter allows you to run both your stock oil cooler, along with an external cooler and/or a remote oil filter.
Fits VW Type 1 with minimal trimming of the sheetmetal. Will not fit doghouse-style coolers. $69.95
|
VW CYLINDER SHIMS
.060" cylinder shims for VW Type 1. 85.5mm cylinders
These steel shims allow for adjusting the deck height without machining the pistons. Corrects for increase in stroke and compensates when the case is surface machined clearanced for standard 8mm studs. $15.95
|
VW CYLINDER SHIMS
.010" cylinder shims for VW Type 1. 94mm cylinders
These steel shims allow for adjusting the deck height without machining the pistons. Corrects for increase in stroke and compensates when the case is surface machined clearanced for standard 8mm studs. $12.95
|
VW DUAL PORT INTAKE MANIFOLD END KIT
This dual port intake manifold end castings kit is thick enough for porting and polishing. Made for VW 71-74 dual port engines.
These new ball burnished aluminum end castings come complete with necessary hardware and intake boots. Replaces VW part # 113-129-709G & 113-129-710D $129.99
|
EMPI 8688 Sand Seal Pulley Kit, Bolt-In
SAND SEAL PULLEY KITS
EMPI 8688 Sand Seal Pulley Kit, Bolt-In
5-Hole style and come with black degree numbers and marks.
Seals, collars and spacers are included. $79.95
|
VW TYPE 4 PROGRESSIVE CARBURETOR CONVERSION KIT
Accelerate with two barrel performance...Cruise with one barrel economy!
Complete kit includes.......Carburetor with Electric Choke - Manifold - Air Cleaner with Gauze element - Fuel Line - All Necessary Hardware.
$550.00
|
VW FAN V BELT
High quality belt for use with a power pulley. 10�x 900mm
Fits:
Bug CV 54-60
Bug SDN 54-60
Bus 54-59
GHIA 56-60 $7.95
|
VW FAN V BELT
High quality belt for use with a power pulley. 10�x 1000mm
Fits:
Type 3 63-73 $6.95
|
EMPI 8696 Sand Seal Pulley Kit, Bolt-In
SAND SEAL PULLEY KITS
EMPI 8696 Sand Seal Pulley Kit
MACHINE IN SEAL - Requires Cutting of the Case
5-Hole style and come with black degree numbers and marks.
Seals, collars and spacers are included. $59.95
|
|
|
