VW AIR FILTER

For Type II Volkswageens with 1700CC-2000CC Engines

VW AIR FILTER

For 86-92 Vanagons

VW Carburetor Base Gasket

For 1600CC engines from 1971-74

Original VW German Dual Port End Castings

These have all been inspected and cleaned but are not painted

VW INTAKE MANIFOLD BOOT

Fits all dual port Volkswagen engines

Sold as pair

VW BARREL NUT

Volkswagen throttle cable clamp and barrel connector for accelerator cable and heater cable.

For all VW models

VW THROTTLE RETURN SPRING

For all 1300CC-1600CC Beetle Style Engines

VW Intake Manifold Sleeve

For VW Bus 74-79 & Vanagon 80-92

311-133-259 Locating Block for Fuel Injectors, Each

For Type 3, 68-74

VW FUEL FILTER

For Beetle 75-79, Bus 75-79, & Vanagon 80-89

VW PRESSURE PLATE

High Quality OE Brand 200mm VW Full Diaphram Pressure Plate

For 1971 & newer Volkswagen Type 1, 2, 3s where the throwout bearing slides on the "candlestick."

Applications:
Beetle 1971-1977
Super Beetle 1971-1979
Bus 1971
Karmann Ghia 1971-1974
Type 3 1971-1973
Thing 1973-1974

VW HEAVY DUTY PRESSURE PLATE

High Quality O.E. Brand 200mm VW Full Diaphram Pressure Plate

For 1970 & older Volkswagen Type 1, 2, 3s where the throwout bearing hangs with two clips.

Applications:
Beetle 1967-1970
Bus 1962-1970
Karmann Ghia 1967-1970
Type 3 1963-1970

VW CLUTCH DISC

STOCK 200mm Rigid Type Clutch Disc

For Type 1, 2, and 3 Volkswagens from 1966-1978 with 1500-1600cc engines

SACHS VW CLUTCH DISC

STOCK 200mm Rigid Type Clutch Disc

For Type 1, 2, and 3 Volkswagens from 1966-1978 with 1500-1600cc engines

VW CLUTCH DISC

HEAVY DUTY 200mm Rigid Type Clutch Disc

For Type 1, 2, and 3 Volkswagens from 1966-1978 with 1500-1600cc engines

VW CLUTCH DISC

200mm Spring Type Clutch Disc

For Type 1, 2, and 3 Volkswagens from 1966-1978 with 1500-1600cc engines

SACHS VW CLUTCH DISC

200mm Spring Type Clutch Disc

SHIPS NEXT DAY

For Type 1, 2, and 3 Volkswagens from 1966-1978 with 1500-1600cc engines

VW GERMAN RELEASE BEARING

Clutch release bearing for pre-1970 Type 1, Type 2, and Type 3s.

VW RELEASE BEARING

Clutch Release Bearing for Type 1,Type 2, and Type 3 Volkswagens made in 1971 or later.

VW RELEASE BEARING CLIP

Heavy duty clip for 111-141-165A Bearing

VW CLUTCH GUIDE SLEEVE

For Type 1, 2, and 3 Volkswagens from 1971 and newer.

Release Bearing fits over input shaft.

VW HEAVY DUTY CROSS SHAFT

For Type 1, 2, and 3 Volkswagens from 1970 and older.

1200-1600cc engines

New Centrifugal Distributor 009

New 009 distributor is the perfect replacement for most aircooled VW engines. It is a centrifugal advance distributor. Comes complete with cap- rotor- points- and condenser. These distributors are a must whenever you plan to change to any after market carburetor kit.

VW ENGINE GASKET SET

Full gasket set for 40hp 1200cc Volkswagen engine

VW ENGINE GASKET KIT

This kit contains all the gaskets and seals for one complete engine assembly! Features German white push rod tube seals that stay softer much longer than the red Brazil ones. Brazil seals tend to get very hard and seep oil within a year or two. German made seals stay soft for much longer!

The flywheel seal is NOT included 

CLUTCH CROSS SHAFT REPAIR KIT

For late 1972 Beetle and 1973 on up.

CLUTCH CROSS SHAFT REPAIR KIT

For Beetle 61-70 / Ghia 61-70 / Bus 61-70 / Type 3 62-70

Oil Cooler Conversion Seal Kit

8 MM to 10 MM - For 40HP & 1200-1600CC VW Engines

Used to install a late oil cooler on an early VW engine

VW Oil Strainer Gasket Kit

For 1700CC-2000CC Engines

Bus 72-79 / Vanagon 80-83

VW OIL CHANGE GASKET KIT

For all 1200CC-1600CC Beetle Style Engines

Does 1 oil change

Kit includes 2 paper gaskets, 6 copper sealing washers, and a copper drain plug washer.

VW DUAL PORT HEAD STUD KIT - 8 MM

For 1600CC Engines

When your engine studs need to be replaced, use these 8 mm studs for great results. Kit includes all head studs, head washers, and head nuts.

VW 2000cc PISTON & BARREL SET DISH

94mm 2000cc piston & barrel set for Volkswagen Type 2 & 4

VW 1800cc PISTON & BARREL SET

93mm 1800cc piston & barrel set for Volkswagen Type 2 & 4

VW 1700cc PISTON & BARREL SET

90mm 1700cc Piston & barrel set for Volkswagen Type 2 & 4

VW 2000cc PISTON & BARREL SET FLAT TOP

94mm 2000cc piston & barrel set for Volkswagen Type 2 & 4

VW 1700cc PISTON & BARREL SET FLAT TOP

90mm 1700cc piston & barrel set for Volkswagen Type 4

VW 92MM PISTON & BARREL SET

92mm big bore piston & barrel set for Volkswagen Type 1 & 3

VW 94MM PISTON & BARREL SET

94mm big bore piston & barrel set for VolkswagenType 1 & 3

VW 94MM PISTON & BARREL SET

94mm Big Bore STROKER Piston & Barrel set for Volkswagen Type 1 & 3

Complete with piston rings

VW Type 4 Clutch Kit 228mm

VW PISTON RING COMPLETE SET-94MM

1.75x2x3.5MM Ring Size

All rings for one engine

For Vanagon 86-92 2.1L

VW PISTON RING COMPLETE SET - 85.5MM

2x2x5MM Ring Size

Complete set for 4 pistons

For Beetle/Ghia/Type 3 70-79

VW PISTON RING COMPLETE SET - 92MM

2x2x5MM Ring Size

All rings for one engine

For Beetle/Ghia/Type 3 70-79

VW PISTON RING COMPLETE SET - 92MM

1.5x2x4MM Ring Size

All rings for one engine

For Beetle/Ghia/Type 3 70-79

VW PISTON RING COMPLETE SET-90MM

All rings for one engine

For VW Bus 72-73, 1700CC

VW PISTON RING COMPLETE SET-94MM

1.75x2x4MM Ring Size

All rings for one engine

For VW Bus 68-79 2.0L & Vanagon 83-85 1.9L

Make sure to measure piston ring gland sizes before ordering.

VW PISTON RING COMPLETE SET - 93MM

All rings for one engine

For VW Bus 74-75, 1800CC

VW PISTON RING COMPLETE SET - 94MM

1.5x2x4MM Ring Size

All rings for one engine

For ALL TYPE 1 ENGINES WITH AFTERMARKET 94MM PISTONS

AND THE DIMENSIONS LISTED ABOVE