VW FLYWHEEL LOCK TOOL

This Volkswagen universal flywheel lock woks on both 6 and 12 volt flywheels. Bolting through the engine case, it locks the flywheel securely in position for removal and installation of the gland nut.

36MM GLAND/AXLE NUT SOCKET

This 12 point 36mm Gland/Axle nut socket is used to remove flywheel/gland or axle nuts along with your breaker bar.

180MM LIGHTENED FLYWHEEL

This 180mm, 6 Volt, 109 tooth Formula V lightened flywheel is German forged and CNC lightened to a minimum of 12lbs.

VW 12LB, 8 DOWEL LIGHTENED FLYWHEEL

HELPS MAKE YOUR AIR COOLED VW ACCELERATE FASTER - WITHOUT SACRIFICING RELIABILITY

MANUFACTURED BY MOFOCO USING A CNC TURNING CENTER MACHINE;

WE ALWAYS USE GENUINE, ORIGINAL EQUIPMENT GERMAN FLYWHEEL CORES!

WEIGHS JUST 12 POUNDS!

8 DOWEL

NO CORE REQUIRED

130 teeth for 12 volt applications

VW 180MM STOCK FLYWHEEL

Stock German Forged CNC Machined & Balanced Volkswagen Type 1 flywheel - 180mm; 6 volt. 1965 & earlier 40hp motor. 8mm dowel pins.

Stock Flywheel
O.E. Forged German
Volkswagen Type 1
200mm
12 volt

HI-PERFORMANCE CHROMOLY GLAND NUT - 36MM

EMPI 4026 Chromoly Gland Nut w/washer

Don't take a chance on stock gland nuts in high performance applications.

This ultra strong bad boy is made from 4130 chromoly. 

The extra strength chromoly and concave spring steel washer provide maximum holding power. Fitted with special pre-greased needle bearing and grease seal. 

Compatible with stock 4 dowel pin and 8 dowel pin flywheels and features a 36mm nut size, NOT a 1 7/8"

VW LIGHTENED FLYWHEEL

Looking for an even lighter flywheel for your Type 1? Look no further than Mofoco's 10.5 LB Lightened Flywheel, made from O.E. German Forged Cores.

130 teeth for 12 volt applications

EMPI 4099 CHROMOLY FLYWHEEL, 12-VOLT, 200MM

This chromoly version of our lightened flywheel is the answerfor anyone looking ofr the ultimate in durability under extreme conditions. One piece chromoly construction and offset 8-dowel hole pattern along with a weight of approximately 13lbs., make this fully balanced flywheel the best option for a high performance engine. 12-volt 200mm (130 teeth) O-ring style.

CNC Machined Resurfaced Forged German Flywheel. Fits Type 2 and Type 4 applications with 210mm flywheel

1 AVAILABLE

VW BUS TYPE 4 228mm FLYWHEEL

Original German flywheel that has been resurfaced

VW OE German 36HP STOCK FLYWHEEL

Stock German Forged CNC Machined Volkswagen Type 1 flywheel - 36hp motor. 6mm dowel pins.

VW 180MM FLYWHEEL

13lbs, 8 doweled, Non - Oring Style

VW LIGHTENED FLYWHEEL

Looking for an even lighter flywheel for your Type 1? Look no further than Mofoco's 9 LB Lightened Flywheel, made from O.E. German Forged Cores.

130 teeth for 12 volt applications

VW 180MM STOCK FLYWHEEL

Stock German Forged CNC Machined & Balanced Volkswagen Type 1 flywheel - 180mm; 6 volt. 1965 & earlier 40hp motor. 8mm dowel pins.

O-RING STYLE

VW 200MM FLYWHEEL

Here we have a brand new 200MM 12 volt, 130 tooth 4 dowel flywheel.

This a cast steel flywheel with a brand new replacable steel ring gear.

VW 200MM FLYWHEEL

Here we have a brand new 200MM 12V, 130 tooth, 8 dowel flywheel. This a cast steel flywheel with a brand new replacable steel ring gear. This is a good choice for moderate horsepower applications.

VW .24MM FLYWHEEL SHIM

VW .24MM FLYWHEEL SHIM

VW .32MM FLYWHEEL SHIM

.32mm flywheel shim for 1300-1600cc air cooled Volkswagen engines from 1965-1979.

VW AUTOSTICK FLEXPLATE

FLYWHEEL

THE ONE YOU GET MAY NOT BE PAINTED

Flexplate with autostick tranmissions

Fits 1968-1977 Bug, Superbeetle, Karmann Ghia

This is a reconditioned item.

The dowels are good, the rivits are tight, the weld on nuts have good threads, nothing is bent.

This is good to go as is.

Please check compatability on this listing for the application.

VW FULLY AUTOMATIC FLEXPLATE

Flexplate for automatic tranmissions

Fits 1972 and up VW Bus Type 4 1700cc, 1800cc, and 2000cc engines

This is a reconditioned item.

This is good to go as is.

Please check compatability on this listing for the application.