VW .010" CYLINDER SHIM SET

Steel shims allow for adjusting deck height without machining the pistons. Corrects for increase in stroke and compensates when case is surface machined clearanced for standard 8 mm studs.

Fits VW Type 1 engines.

For 85.5mm cylinders.

VW .03" CYLINDER SHIM SET

Steel shims allow for adjusting deck height without machining the pistons. Corrects for increase in stroke and compensates when case is surface machined clearanced for standard 8 mm studs. Fits VW Type 1 engines.  For 85.5mm cylinders.

VW CYLINDER SHIMS

.060" cylinder shims for VW Type 1. 85.5mm cylinders

These steel shims allow for adjusting the deck height without machining the pistons. Corrects for increase in stroke and compensates when the case is surface machined clearanced for standard 8mm studs.

VW .01" CYLINDER SHIM SET

Steel shims allow for adjusting deck height without machining the pistons. Corrects for increase in stroke and compensates when case is surface machined clearanced for standard 8mm studs. Set of 4. Fits 90.5 & 92mm cylinders. For VW Type 1 engines.

VW .02" CYLINDER SHIM SET

Steel shims allow for adjusting deck height without machining the pistons. Corrects for increase in stroke and compensates when case is surface machined clearanced for standard 8mm studs. Set of 4. Fits 90.5 & 92mm cylinders.

90.5mm/92mm Cylinder Shims

EMPI 21-7076 90.5mm/92mm Cylinder Shims .090"

Steel shims allow for adjusting deck height without machining the pistons.

Corrects for increase in stroke and compensates when case is surface machined.

For standard 8mm studs and 10mm studs.

Sold in sets of 4.

VW CYLINDER SHIMS

.010" cylinder shims for VW Type 1. 94mm cylinders

These steel shims allow for adjusting the deck height without machining the pistons. Corrects for increase in stroke and compensates when the case is surface machined clearanced for standard 8mm studs.

VW .02" CYLINDER SHIM SET

Steel shims allow for adjusting deck height without machining the pistons. Corrects for increase in stroke and compensates when case is surface machined clearanced for standard 8mm studs. Set of 4. Fits 94mm bore VWs.

VW .03" CYLINDER SHIM SET

Steel shims allow for adjusting deck height without machining the pistons. Corrects for increase in stroke and compensates when case is surface machined clearanced for standard 8mm studs.  Set of 4. Fits 94mm bore VWs.

VW .040" CYLINDER SHIM SET

Steel shims allow for adjusting deck height without machining the pistons. Corrects for increase in stroke and compensates when case is surface machined clearanced for standard 8mm studs.  Set of 4.  Fits Type 1 VWs with a 94mm big bore.

VW .04" CYLINDER HEAD SPACERS

VW steel cylinder head spacers (.040") allow for adjusting deck height easily without removing the cylinders. Compensates for zero deck height when heads have been machined, or in stroker setups. Set of 4.

VW FRONT END ADJUSTER, BALL JOINT

For use on models from 1966 and LATER

Requires one on each tube; cutting and welding required!

VW FRONT END ADJUSTER, LINK PIN

For use on models from 1965 and prior.

Requires one on each tube; cutting and welding required!

VW REAR DISC BRAKE CONVERSION KIT

VW rear disc brake conversion kit with emergency handbrake for all IRS & Swingaxle Type 1s. Includes Beetles, Buggys, Sandrails. Kits are available for both swing axle and IRS Type 1 based applications. All kits come complete with rotors, calipers, cables all necessary hardware. This deluxe kit comes with HD cast mounting brackets

Standard 4x130 bolt pattern

Front Disc Brake Kit

Wide 5 VW Bolt Pattern

EMPI 22-2880 Front Disc Brake Kit, Link Pin, 5 lug, 5/205, 15" Rims to 65

A special brake rotor and caliper mount bracket combined to give you a premium disc brake upgrade using your existing front spindles.

Kit comes complete with master cylinder, brake lines, floating calipers with brake pads, wheel bearings, grease seals and all necessary hardware.

Now you can have the stopping power of disc brakes and have the early 5 on 205 rim of your choice, and no adapters!

WILL NOT WORK WITH DROP SPINDLES.

Caliper guide pins pre-installed.

Wide Rear Disc Brake Kit w/o E-Brake

EMPI 22-2930 Wide Rear Disc Brake Kit w/o E-Brake

5/205, Swing Axle 58-67 Wide Track rear disc brake kits are for Off-Roaders who are looking to increase their rear wheel "track".

Kits are without emergency brakes, and come complete with 1-piece minimum offseet 1" extra wide rotors, calipers, pads, mounting brackets, and all necessary hardware and gaskets for the complete installation.

Rotors are threaded for 12mm and 14mm studs.

PADS FOR STEEL BRACKET KITS

EMPI 22-2966 Pads for Steel Bracket Kits

Set of 4

VW FRONT DISC BOLT-ON BRAKE KIT

VW front disc brake kit for link pin style applications. Bolt-on 5/130 pattern.

Kit includes bolt-on heavy duty brackets and conversion bearings. Hardware included. Four bolt pattern shown for picture only.

Carburetor Tune up Kit

EMPI 2202 Carburetor Tune up Kit WEBER Progressive, DFV, Holley 5200, EPC 32/36F (VW).

Basic repair kit come complete with needle/seat, all necessary o-rings and gasket.

Kit also includes floats and accelerator pump diaphragms.

Carburetor Tune up Kit

EMPI 2238 Carburetor Tune up Kit Holley Bug Spray

Basic repair kit comes complete with needle/seat, all necessary o-rings and gasket.

Carburetor Tune up Kit Zenith 32NDIX - Minor

EMPI 2258 Carburetor Tune up Kit Zenith 32NDIX - Minor. 

Basic repair kit come complete with needle/seat, all necessary o-rings and gasket.

VW CARBURETOR REPAIR KIT

Basic VW carburetor repair kits comes with accelerator pump diaphram, needle/seat, and all necessary o-rings & gaskets.

Note: kit includes all parts needed for one carburetor; if dual carb engine, two kits are needed.

Kit parts include only what you see in picture

EMPI 2365 Carburetor Tune-up Kit

WEBER 34 ICH, EPC 34X

34ICT

The kit is a basic repair kit and comes complete with needle/seat, all necessary 0-rings and gaskets. 

Electric Fuel Pump Mount Kit

EMPI 31-3010 Electric Fuel Pump Mount Kit

Fuel Pump Mount Kit allows for the installation of EMPI or Facet electric fuel pumps in the stock pump location. Hardware and gasket included.

Billet Fuel Pump Block-off w/hardware

EMPI 31-3011Billet Fuel Pump Block-off w/hardware

Fuel Pump Block-off/Mount Block off with 12mm threaded breather boss.

Block off in high tech polished Billet aluminum. Includes mounting gasket.

EMPI 3137 Replacement Pins & Clips, Long, Pair

EMPI 3157 Belly Pan Gasket

Installs between body and pan providing a water-tight seal.

Great for body-off restorations, Kits cars, Baja Bugs and Dune Buggies

VW CABLE SHORTENING KIT

Shorten your clutch, emergency brake and throttle cables quickly.

A must for all buggies that have shortened pans.

CLUTCH CABLE SHORTENING KIT

Shorten your clutch cable quickly and easily.

A must for off-road Buggies!

VW E-BRAKE CABLE SHORTENING KIT

Shorten your emergency brake cable quickly and easily.

A must for Volkswagen Buggies with shortened pans.

VW THROTTLE CABLE SHORTENING KIT

Shorten your Volkswagen throttle cable quickly and easily.

End is designed for use with barrel nut.

VW THROTTLE CABLE EXTENDING KIT

2-piece Volkswagen throttle cable extending kit that can be installed onto the existing end of a throttle cable.

VW TRANSMISSION MOUNT KIT

This Volkswagen Bug to Bus transmission mount kit allows for installing a Type 2 I.R.S. transmission into a Type 1 chassis. Featuring a heavy duty steel saddle, mount, and straps, eliminate your stock mounts & saddle for maximum support with no flex. A must for competition use!

Your particular application will dictate the proper axle length needed. CV's and components you may need.

VW THROWOUT BEARING

This EMPI branded throwout bearing fits VW models 1970 & earlier: Bug / Beetle, Karmann Ghia, Type 2 Bus Transporter, and Type 3.

VW LARGE INTAKE BOOT CLAMPS

Sold in pairs.

VW INTAKE MANIFOLD GASKETS

Fits Type 2 & Type 4 engines; 1700-2000CC. 3 & 4 bolt gaskets.

Sold in pairs.

EMPI 3245 Carburetor Adaptor For Alternator Conversion

Sometimes necessary when doing an alternator conversion. Spaces up the stock carburetor.

Comes with studs, nuts, and gaskets.

FOR 28/30 PICT CARBURETORS ONLY!

VW INTAKE MANIFOLD GASKETS

Dual port Volkswagen intake manifold gaskets with larger intake face.

Sold in pairs.

EMPI 33-5000 OIL THERMOSTAT ONLY W/3/8" NPT

Mounts in-line and bypasses oil cooler until oil warms up to approximately 175 degrees. 

Always partially open to avoid over pressurizing. 

A must in performance and cold-weather applications.

Sold separately, fittings P/N: 9211 or 9212 and clamps P/N: 9225

For complete kit with fittings and clamps P/N: 33-5010

EMPI 33-5010 OIL THERMOSTAT W/FITTINGS AND CLAMPS

Mounts in-line and bypasses oil cooler until oil warms up to approximately 175 degrees. 

Always partially open to avoid over pressurizing. 

A must in performance and cold-weather applications.

VW CARBURETOR BASE GASKETS

TWO Base gaskets for 40/44 IDF/DRLA Volkswagen carburetors.

VW TYPE 1 ALUMINUM HEATER HOSE

Contains no paper. Heat and corrosion resistant to 450 degrees.

Sold Each

VW MUFFLER FLANGE GASKETS

Package of two VW small 3 bolt exhaust flange gaskets