Chrome 3 gauge hole dash panel made to accept all 2 1/16" gauges. $12.95
|
Chrome 3 gauge hole dash panel made to accept all 2 1/16" gauges. $12.95
|
Chrome 2 gauge/1 tach hole dash panel made to accept all 2 1/16" gauges and 3 1/8" tachs. $13.95
|
VW GAUGE READY DASH PANELS
DASH PANEL IS MADE TO ACCEPT ALL 2 1/16" GAUGES.
CHROME PLATED $12.30
|
Chrome 2 gauge hole dash panel made to accept all 2 1/16" gauges $13.95
|
CV Drive Flange for VW Type 4, 091 Transmission to Porsche 930 CV Joint
$109.95
|
EMPI Forged Conversion Stub Axles
T1 Vehicle to 930 CV Joint
$109.95
|
VW SWING AXLE SPACER KIT
Volkswagen Stock axle spacers just won't hold up to the abuse of off-road and high-performance applications. This super duty 4-piece hardened spacer set is the answer.
Thin spacer is 6.5mm thick with a 30mm opening.
Thick spacer is 18mm thick with a 30mm opening. $29.95
|
VW URETHANE BUSHING SHIFTER BOX
Fitting this on the back of the EMPI shift box will keep the shift rod in place.
Two self-tapping screws are needed to fasten box. $6.95
|
EMPI 16-5102 Urethane Shift Coupler, Early Style
The strength and durability of Urethane will out-last and out-perform standard rubber products in every application.
Install Urethane and never look back!
$19.95
|
VW TRANSMISSION SHIFT COUPLER
Much like the original one it replaces, this fits Volkswagen Type 1s 1965 and newer; and other applications that use this style of coupler.
The key improvement on this unit is the two inserts for the cage have been made out of urethane so the shifter linkage will be much tighter and responsive.
A must do upgrade for almost every car that uses this style of shift coupler! $21.95
|
EMPI 16-5109 URETHANE SNUBBER - LINK PIN, PAIR $21.95
|
VW URETHANE REAR SNUBBERS PAIR
The strength and durability of urethane will out-last and out-perform standard rubber snubbers. Install urethane and never look back!
Fits 1958-1979 Volkswagen Beetles. $21.95
|
VW URETHANE SPRING PLATE BUSHINGS PAIR
The strength and durability of urethane will out-last and out-perform standard rubber products in every application.
Replaces early Volkswagen Type 1 & Type 3 style outer spring plate/torsion bar bushings
Bug, Ghia, Dune Buggy, Sandrail, Trike
See item page for more fitting information.
$23.95
|
VW URETHANE SPRING PLATE BUSHINGS PAIR
The strength and durability of urethane will out-last and out-perform standard rubber products in every application.
Replaces early Volkswagen Type 1 & Type 3 style outer spring plate/torsion bar bushings
Bug, Ghia, Dune Buggy, Sandrail, Trike
See item page for more fitting information.
$23.95
|
VW URETHANE SPRING PLATE BUSHINGS PAIR
The strength and durability of urethane will out-last and out-perform standard rubber products in every application.
1 3/4" inside diameter
Fits VW Type 1 style spring plate/torsion bars only
Bug, Ghia, Dune Buggy, Sandrail, Trike $23.95
|
EMPI 16-5161 Stainless Steel T-Bolt Style Alternator/Generator Strap
The ultimate alternator/generator strap. The great and long lasting looks, strength, and durability of stainless steel with the positive security of the t-bolt style. A must for off roading. $10.95
|
EMPI 16-8242 UNDER FENDER OIL FILTER MOUNT, TYPE 1 THRU 73'
Remote Oil Fitler Mounts. Bolt-on full flow oil filter mounts make filter mounting easy. Covers street sedan applications by cleanly tucking the filter up under the rear fender on a black powder coated steel mount that attaches with the bumper bracket bolts. Hardware Included. $23.95
|
VW OIL SUMP PLATE
This billet aluminum sump plate will never bend or distort due to over-tightening, unlike stock plates that can cause dangerous leaks. Since it is CNC machined from high grade aluminum billet, it also adds a custom look to any engine! $36.95
|
EMPI 16-9512 BILLET "OIL" FILLER CAP
Billet Oil Cap with "OIL" etched on the top
Cap fits EMPI threaded filler tubes as well as most other threaded aluminum oil fillers
$24.95
|
VW THREADED OIL GALLEY PLUG KIT
This kit is the first step to any quality engine build. By installing this 12-peice oil galley plug kit, you will realize the advantage and ease of cleaning and inspecting the "life blood" passages of your oiling system. Each kit contains seven 1/8" npt, two 1/4" npt, and three 3/8" npt threaded plugs. Machining of case required $19.95
|
Billet Type 3 Block off Kit
Empi 16-9516 Billet Type 3 Block off Kit Use on late style and Type 3 cases to block off oil fill opening to convert to upright applications. Complete with cast aluminum block-off plate and gasket.
Use on late style and Type 3 cases to block off oil fill opening to convert to upright applications. Complete with cast aluminum block-off plate and gasket. $21.95
|
EMPI 16-9519 Main Bearing Dowel Pin Set
This set of 5 dowel pins is used to align the main bearings. Includes five to do a complete install.
Fits all air cooled VW models
$5.95
|
VW MINI OIL SUMP KIT
Help prevent oil starvation in your VW by installing this "mini" sump to increase oil capacityin your VW Bus, Bug, or Ghia. Kit comes with 3 different size pick-up tubes, studs, nuts, and gaskets.
Your existing drain plug can be re-used, or use our magnetic drain plug. $64.95
|
VW OIL SUCTION KIT
This kit provides consistent oil pick up in your VW Bug, Ghia, or Bus. The supplied sump plate depression keeps the pick-up extension submerged in oil at all times.
The built in screen helps keep harmful particles from reaching vital engine components. This is a great addidtion to any performance-built engine to insure a longer engine life.
$69.95
|
VW PERFORMANCE CRANKSHAFT GEAR SPACER
Gear spacer failure can be a costly event. The stock spacer was never intended to survive the stress of todays high output engines. This performance spacer replaces the stock unit with a solid ring of safety for your gear train. $17.95
|
VW HEX HEAD OIL RELIEF SPRING PLUG
A long overdue solution to the removal of relief plugs. These threaded steel hex head plugs eliminate the need for that giant screwdriver.
Sold as one pair. $12.95
|
COPPER CYLINDER HEAD GASKETS
Set of four copper head gaskets for 90.5-92mm cylinders
Installs between the top of the cylinder and the cylinder head. .040" $34.95
|
COPPER CYLINDER HEAD GASKETS
Set of four copper head gaskets for 90.5-92mm cylinders
Installs between the top of the cylinder and the cylinder head. .050" $34.95
|
COPPER CYLINDER HEAD GASKETS
Set of four copper head gaskets for 92mm cylinders
Installs between the top of the cylinder and the cylinder head. .060" $29.99
|
COPPER CYLINDER HEAD GASKETS
Set of four copper head gaskets for 94mm cylinders
Installs between the top of the cylinder and the cylinder head. .040" $34.95
|
COPPER CYLINDER HEAD GASKETS
Set of four copper head gaskets for 94mm cylinders
Installs between the top of the cylinder and the cylinder head. .050" $34.95
|
34 PICT Carburetor Spacer
EMPI 16-9705 34 PICT Carburetor Spacer, Each Space up your 34 PICT Carburetor to clear the alternator
Each Space up your 34 PICT Carburetor to clear the alternator $12.95
|
VW TRANSMISSION SIDE COVER
Heavy duty aluminum side cover for swing axle
$84.95
|
HEAVY DUTY SIDE COVER FOR IRS
EMPI 16-9905 Heavy Duty Aluminum Side Cover for IRS, each $89.95
|
EMPI 17-2795 King Pin Conversion Inner Bearing
$23.95
|
VW KING PIN CONVERSION BEARING, OUTER
This outer bearing allows you to install ball joint rotors onto king pin spindles.
Requires new seals $23.95
|
Intake Manifold 30/31/34 Pict
EMPI 17-2805 Intake Manifold 30/31/34 Pict (Ref. P/N: 113-129-701AQ)
This manifold allows for the use of 30 PICT-1, 31 PICT-3 or 34 PICT-3 carburetors without adaptors.
Manifold flange is drilled for either stud pattern and comes with heat risers, gaskets, and 1/8" pipe plug.
Drilled and tapped for optional vacuum advance. $109.95
|
EMPI 17-2809 BILLET F/F OIL LINE BRACKET - BLACK, EACH
Billet full flow hose brackets.
Keep oil lines in check while maintaining that Billet look. Bolts on at exhaust flange and helps protect oil lines from engine and exhaust. Fits up to 3/4" O.D. Hose.
Also comes Polished, P/N: 17-2810 $54.95
|
EMPI 17-2810 BILLET F/F OIL LINE BRACKET - POLISHED, EACH
Billet full flow hose brackets.
Keep oil lines in check while maintaining that Billet look. Bolts on at exhaust flange and helps protect oil lines from engine and exhaust. Fits up to 3/4" O.D. Hose.
Also comes in black, P/N: 17-2809 $54.95
|
VW BUG ENGINE NARROW OIL SUMP W/ FILTER
Cast aluminum oil sump is only 1 3/4" deep. Adds oil capacity and offers improved filtration and easy bolt on installation. Filter design allows for unimpeded oil flow even if the filter gets plugged. Stainless steel micron filter can be cleaned and reused. $179.90
|
VW BUG ENGINE CASE OIL DUAL BYPASS ADAPTER
This adapter allows you to run both your stock oil cooler, along with an external cooler and/or a remote oil filter.
Fits VW Type 1 with minimal trimming of the sheetmetal. Will not fit doghouse-style coolers. $69.95
|
VW OIL SUMP FILTER
Replacement filter for 17-2871 & 17-2872
Offers improved filtration as easy filter design allows for unimpeded oil flow even if the filter gets plugged. Stainless steel micron filter can be cleaned and reused. $19.95
|
EMPI 17-2878 - VW Bug Type 1 Dual Circuit Master Cylinder Reservoir Mounts on Top $15.95
|
Billet Combo Fuel Pump Block-off/Coil Mount
EMPI 17-2926 Billet Combo Fuel Pump Block-off/Coil Mount
Polished aluminum Combo Mount serves as a fuel pump block-off, breather vent and ignition coil holder.
Features a 3/8 NPT outlet for vent.
Great looking and functional.
Hardware and gasket included. $59.95
|
EMPI 17-2941 OIL FILLER & BREATHER BOX KIT
The EMPI dual-purpose Oil Filler & Breather Box includes a system of internal baffles that separate the oil from the air then returns the oil back to the engine. It mounts upright on the alternator stand making for easy oil filling and was designed to look like part of the engine. The Billet Aluminum filler cap seals with an o'ring. Aluminum construction offers great looks and leak-free operation featuring an o'ring seal and button-head allen top screws. Vent your valve covers, crankcase, air cleaners...whatever your requirements. Comes with attaching nut, o'rings, gasket and instructions. $129.95
|
EMPI 17-2943 BILLET OIL FILLER CAP
Polished Billet Aluminum Cap with knurled edge for easy grip offers a great finishing touch to any breather tube.
Fits: P/N 17-2941 and alternator stands. $24.95
|
EMPI 17-2946 BILLET ALUMINUM OIL COOLER BLOCK-OFF
Billet Aluminum Oil Cooler Block-off
Show quality Polished Billet Aluminum oil cooler block-off.
Comes with Allen Head Cap Screws for a clean installation along with gasket and hardware. $39.95
|
